Ceramic tiles floor is popular because of durable, and need low maintenance. Ceramic floor has barrier from dirt, stains and all kinds of an impervious particle but not allow heavy soil on floor surface. Like another floor, this floor needs maintenance but not need huge maintenance. This article we talks about what to use to clean ceramic floor tile.
- 1 What To Use To Clean Ceramic Floor Tile?
- 1.1 1. Vacuum floor at least twice a week:
- 1.2 2. Mop tile floor every day:
- 1.3 3. Mop New ceramic floor once a week:
- 1.4 4. Mop floor with clean towel:
- 1.5 5. Wet floor removes stain:
- 1.6 6. Clean floor with warm water and dish soap:
- 1.7 7. Remove tough stain use acid or chemical floor cleaner:
- 1.8 8. Enhance grout glossy:
- 2 Conclusion:
- 3 Related Question (FAQs)
What To Use To Clean Ceramic Floor Tile?
1. Vacuum floor at least twice a week:
An easy way to keep clean ceramic floor is vacuum floor at least twice a week. Use vacuum without beater bar because it’s scratch surface. Vacuum which is made for tiles floor use this type of vacuum, if you are busy mop floor remove dust and dirt.
2. Mop tile floor every day:
Mop floor with warm water, before mop vacuum floor. If water gets dirty then change it and pour clean water again. When mop floor avoids sponge mop and uses mop that not create scratch on surface. If floor is glossy become less then try to mop floor regularly.
3. Mop New ceramic floor once a week:
If your floor is new and glazed not need wet mop regularly. Vacuum floor before mop, take full bucket of mildly-warm water and gallon of dish soap. Change water when it becomes dirty if you use dish soap then mop floor with clean water again.
4. Mop floor with clean towel:
After complete wet mop then starts dry mop that removes excess water. Unglazed tiles more sensitive than glazed tiles, wet unglazed tiles porous pick up dirt, dirt very fast and become dirty soon. So it’s necessary dry mop of ceramic tiles.
5. Wet floor removes stain:
Pre-wet floor surface before applies stain removal chemical. If wet tiles before apply chemicals it absorbs water and it will help to remove stain easily.
6. Clean floor with warm water and dish soap:
Clean floor with Scrub, in this process, take full bucket of mildly warm water with gallon of dish soap. Apply this solution floor using nylon or natural bristle brush and wait 10 or 15 minutes until this solution dry on floor. After dry rinse floor with clean water if not clean properly then use spray commercial floor cleaner.
7. Remove tough stain use acid or chemical floor cleaner:
Sometimes different tough stain need remove and normal floor cleaner not able remove this stain. Use acid floor cleaner or chemical floor cleaner when need removes tough stain. Must follow using caution before apply and follow instruction of apply. Never use abrasive floor cleaner that scratch on floor or decay floor glossy.
8. Enhance grout glossy:
Pour bucket with 2 gallons of warm water, half cup vinegar, and Murphy Oil. Mix this solution gently and apply this solution grout with toothbrush. Try not apply this solution on tiles, let dry solution on grout.
Ceramic tiles did not allow heavy soil, in wet weather use dormmates. When any spills occur take cloth and soak up with warm water and wipe spills. Use dormmate’s interior and exterior of house and if need uses extra carpet or rugs on floor. Must shoes keep off after entering home, wipe pet messy as soon as possible.
Related Question (FAQs)
1.What is the best cleaning solution for ceramic tile floors?
Answer: Pour full bucket on mild-warm water, half cup of vinegar and dish soap. Mix this solution gently and apply this with mop. Must vacuum floor before wet mop, you can use commercial floor cleaner or acid floor cleaner for removing tough stain.
2. Can you use Mr Clean on ceramic tile floors?
Answer: Yes, you can use Mr clean on ceramic tile floor must-see application process from manual.
3. How do you clean unglazed ceramic tiles?
Answer: Clean unglazed ceramic tiles floor with Scrub, pour full bucket of mildly warm water with gallon of dish soap. Apply this on floor using nylon or natural bristle brush and wait 10 or 15 minutes until this solution dry on floor. After dry rinse floor with clean water if not clean properly than use spay commercial floor cleaner.
4. Is Vinegar safe for tile and grout?
Answer: Full bucket of mildly warm water with half cup of vinegar is best natural floor cleaner for tile and grout. Never use bleach on tiles floor because it’s decay glossy of tiles floor. So that vinegar safe for tile and grout.