How To Lay Vinyl Flooring On Plywood?

How To Lay Vinyl Flooring On Plywood?

As an Amazon Associate I earn from qualifying purchases.

Vinyl flooring on plywood is durable if taken care of properly, vinyl floor is easy to clean with a simple sweep or vacuum. With the proper installation, vinyl planks can last 20 years or more. This article will discuss how to lay vinyl flooring on plywood subfloor.

Materials needed to lay vinyl plank flooring on plywood:  

All of these tools are required to lay vinyl flooring on plywood. These are:       

  • Tape measure:
  • Pencil:
  • Straight line or level:
  • Razorblade:
  • A damp piece of cloth:

Let’s discuss in detail.

Tape Measure

Tape Measure is a useful tool when laying vinyl flooring on the plywood subfloor. Tape Measure requires for measuring the length of vinyl flooring and how many planks you require.

Pencil: A pencil is a useful tool when laying vinyl flooring on a plywood subfloor. Pencil is used for making a mark, drawing a line, and marking cut lines.

Straight line or level:

A straight line or level is used to make sure the vinyl flooring is laying flat, also use to make sure a row of vinyl flooring is straight.

Razorblade:

Use to cut off old flooring if still any plank attached to a plywood subfloor. Sometimes razorblade need when laying vinyl flooring on the plywood subfloor.

Warm piece of cloth:

Use to wipe any moisture, seal or dirt from the surface.

Some easy steps to lay vinyl flooring on plywood:

Installing vinyl plank flooring over plywood not too hard a task, follow this guide to make your task accurate.  

Clean The Plywood: 

Clean the plywood surface with a damp cloth, make sure there is no moisture or dirt attached to the plywood. If underlayment contains dirt or moisture it may damage the vinyl flooring. Install vinyl flooring over plywood subfloor this step is very important if you not complete this task properly all installing process will go wrong. If subflooring for vinyl flooring absorbs moisture your floor will require frequent change or reinstall.

Find out center of the room:

Normally center of the room found in the middle of a wall. If you install plywood following a straight line or level mark your work will be more accurate.

Point and mark center of the Room:

Measure the length of your room with your tape measure and mark this with a pencil. Make sure that your tape measure is on a flat surface and then measure from one sidewall to another sidewall. Another measure will be from one window to another window. Note this measurement for further reference.

Peel The First Tile:

Peel the tile from the pack and lay it down on the subfloor. Now use a razorblade to cut a small piece of the tile and put it down on the subfloor. Prepare your subfloor and properly dry adhesive before unpacking tiles.

Lay tile over subfloor:

Lay your first tile over the subfloor. Press tiles together and slide tiles into place. First tile laying is important because it will be a guide for the remaining tiles. Push the tile down with a hand that will help to stick tile on plywood.

Lay down the rest of the tile:

Now lay down the rest of the tile in the same way as the first one. If required use a razorblade to cut tile into small piece. Slightly press two tiles together to fill the gap that prevents water or liquid run through adhesive. Now you know how to lay vinyl plank flooring on plywood and how to lay vinyl sheet flooring on plywood without a professional person.   

Can I put vinyl flooring on plywood?

Yes, you can put vinyl flooring on plywood without any damaging subfloor. Follow our previous article make your floor installing task easy.

Conclusion:

Vinyl is a popular choice for high footsteps area and is easy to install. Require low maintenance and a wide range of colors, designs available in the market. Vinyl flooring can be laid in any room of your house, even in the kitchen or bathroom. If you have the proper installation tools you can easily install vinyl tile over plywood floor in your home. Happy flooring!!

Related Post:

Leave a Comment

Your email address will not be published. Required fields are marked *