How to fix gap between tub and vinyl floor?

How To Fix Gap Between Tub And Vinyl Floor?

As an Amazon Associate I earn from qualifying purchases.

The gap between tub and vinyl floor occurs for different reasons, but if the gap is large it will be very dangerous. If it is not close sometimes people will slip and fall. To avoid sudden accidents, carefully check the gap between tub and vinyl floor. In this article, we discuss how to fix the gap between tub and vinyl floor.

The gap between tub and vinyl floor occurs for different reasons, but if the gap is large it will be very dangerous. If it not close sometimes people will slip and fall. To avoid sudden accidents, carefully check the gap between tub and vinyl floor.

Use regular caulk for 1/8 inch width smaller gap but if the gap is larger than 1/8 inch use sanded caulk. Clean the gap properly before filling the gap otherwise, you can’t get strong bonding.

How to fix gap between tub and vinyl floor?

If you find a large gap between tub and floor tile fill the below guidelines. You need some necessary equipment to fill the gap between tub and floor.

Things you will need:

  • Caulk remover
  • Vacuum cleaner
  • Rubbing Alcohol
  • Caulk gun
  • Paper towel

Remove old caulk:

Remove the old caulk from surface carefully otherwise new caulk not fit properly. You may use caulk removing from any hardware store or online. If you not have caulk remover, you can remove old caulk using a razor scraper and putty knife. Use a hairdryer to heat the surface that makes the surface smooth.

Clean the area:

After removing old caulk from tub clean the area with a vacuum cleaner. For more cleaning wipe down the surface with rubbing alcohol. If any dirt is left on the floor bond between tub and floor tile not stick.

Use backer rod:

If your gap is large only caulk will not fill the gap, use the backer rod to fill gap. So insert the backer rod to fill the gap properly.

Use painter tape:

Use painter tape from 1/8 inch away from the gap. Painter tape makes a straight line and ensures a border that prevents caulk from spreading.

Fill the gap with caulk:

Now it’s time to fill the gap with caulk, use a caulk gun to fill the gap. Straight the caulk with your finger that provides an accurate line. Wipe your finger every time you use silicone based caulk.

Let the area dry:

After caulk applying task removes painter tape. Now, wait 24 hours to dry the area completely dry. From this guide you learn about how to fill gap between tub and floor and how to fill the gap between tub and floor, so don’t worry if any gap is visible between vinyl plank next to tub.

Conclusion:

The bathroom is one of the most relaxing places in any home, so need special care. Shower relieve yourself and make your moments precious. That’s why it’s essential to keep a bathroom free from gap and moisture. Our guide will help your fix your gap within a few hours. Different colors of caulk are available in the market, choose your desired caulk from here and fill your gap.

Faq about gap between tub and vinyl floor

How to fix large gap between tub and floor?

Remove the old caulk carefully from gap, use caulk removing the chemical that makes your task easy. If the gap between tub and floor tile is larger than 1/4 inch, use a backer rod to fill the gap. Now clean the area with rubbing alcohol, ensure not dirt is left on the floor. Now use painter tape on the floor and apply caulk on the floor. Wait for one dry the gap and remove painter tape from the floor.

How to caulk between tub and floor?

Using caulk removing chemicals remove the old caulk, use a vacuum cleaner to remove fine dust. Now apply caulk with gun on the gap between tub and floor. Let dry the area and enjoy gap free tub. If you have a question about how to seal vinyl plank flooring in a bathroom or how to seal bathtub to floor follow these steps.

Related Post:

Leave a Comment

Your email address will not be published. Required fields are marked *