Vinyl siding has become a popular alternative to brick or stone exteriors. Vinyl siding is made from polyvinyl chloride (PVC) resin and fiberglass composite material. For this reason, it is easy to install and relatively affordable, especially when compared with the cost of brick or stone. The vinyl siding adds a nice touch to your home. A wide range of colors of vinyl siding is available in the market. Here’s see the complete guide about how to replace vinyl siding with brick.
You require the below tools to replace vinyl siding with brick:
- Bricks
- Angle iron
- Screws
- Hammer
- Drill machine
- Brick jointer
- Mortar
Contents
Guide To Replace Vinyl Siding With Brick
Remove The old Siding:
Start by removing the existing siding. This can be done by cutting saw along line. If you have experience, you can also use a reciprocating saw to cut the corner. You may use another tool such as a hacksaw with a jigsaw blade, depending on where the corners are. Vinyl siding is installed from bottom to top so start removing the panel from top to bottom.
Prepare site:
After removing of old siding, the next step is to prepare the site for the new installation. You can use a claw hammer to pull off nails from the wall. Make a strong foundation to make your structure enough safe. If your existing moisture barrier paper is already damaged replaced it with a new one.
Use angle iron:
Using angle iron you can easily build a foundation of the wall. If you hold the angled iron bottom of the foundation you can easily calculate the number of angle iron you will need. Now drill holes from 1 foot apart after that mark the holes of the foundation.
Lay first brick :
Prepare brick motor following manufacturer’s instructions but remember mortar not will be too thick or too thin. Take a trowel to spread out the mortar along the first row after that lay the first brick. Keep brick edge and angle iron ledge in same align but not merge them. For best output keep ½ inch free space between the ledge and brick. Now remove the excess mortar for a better joint.
Ensure moisture in the hole:
Before brick wall foundation ensures enough moisture, especially from the mortar. Because mortar can’t make a strong bonding between the wall and bricks if the hole is not damp. If you want the best results then pour ¼ cup of water over the mortar on each side of the foundation.
Build the leads:
You can use the brick motor with the angle iron to create different molded brick leads. If you want these supports for your window then it is best to make a pole for better construction. You can use angle iron as the lead for your brick wall.
Complete first brick course:
After laying the first brick course, you may use the brick jointing tool to ensure an even surface. In this case, the most important factor is to ensure that bricks are level and not too high or too low.
Create Brick Ties:
After laying the first course of bricks create the brick ties. Using corrugated ties to the studs makes the bonding more durable.
Build the wall high:
After laying the first course of bricks, you can start to build your wall high. Before making each new course ensure enough mortar on the joints. Use a trowel to spread out mortar on joints. In the modern market, siding is easy to install and saves time too. But if you have an old house then it is a better method to replace vinyl siding with brick.
Can you replace vinyl siding with brick?
Of course, you can replace vinyl siding with brick. But if you want the best results you need to prepare your site very well. Make sure no moisture gets into the holes and also make sure that there is enough mortar on each joint. Use proper tools for the installation of brick walls and ensure that all the joints are tight.
Conclusion:
If you follow the above tips and steps then it is easy to replace the vinyl siding with brick. In this method replace old siding with a new one. If you are interested to install a brick wall follow the above steps.
